Reliable Supply of Hypodermic Needle Tubing and Syringe Without Needle

The global medical device industry demands components that combine precise injection molding for Medical product with strict tolerances, material versatility, and high-volume consistency. For applications ranging from hypodermic needle tubing to syringe without needle systems, manufacturers require a production partner capable of delivering up to 100,000 units per month with 0.05mm accuracy. Thinkmold Precision Industries Co., Ltd (China) now offers injection plastic needle tubing engineered from PP, PE, PC, PVC, ABS, and PET, supported by LKM mould bases and customizable hot runner systems.
Why Material Selection Defines Needle Tubing Performance
Injection plastic needle tubing must meet chemical resistance, durability, and sterilization requirements. Data from production records show that precise injection molding for Medical product achieves a 0.05mm tolerance across six material families:
PP (Polypropylene) – Chemical resistance to 80+ solvents, cost-effective for high-volume needle tubing.
PE (Polyethylene) – Low friction coefficient (0.1–0.2), ideal for smooth insertion in hypodermic needle tubing.
PC (Polycarbonate) – Impact strength up to 800 J/m, transparent for visual flow monitoring.
PVC – Biocompatible (ISO 10993), flexible for syringe without needle connectors.
ABS – Heat deflection temperature 98°C, suitable for autoclavable components.
PET – Lightweight (density 1.38 g/cm³), clarity >90% for laboratory needle tubing.
Every batch of needle tubing undergoes dimensional validation using optical comparators, ensuring the precise injection molding for Medical product process maintains ±0.05mm even for multi-cavity tools.
Tooling Configuration: Cavity Numbers, Runners, and Steel Grades
To achieve consistent hypodermic needle tubing geometry, mould design directly impacts cycle time and part quality. Thinkmold offers:
Mould type: 1 or 2 cavities as standard, or fully customized cavity layouts.
Cavity & Core steels: 1.2344, 1.2767, or Superplast 400 (hardness 48–52 HRC).
Mould base: LKM – globally standardized for interchangeability.
Hot runner: Needle nozzle direct on part or hot tip systems, reducing sprue waste by up to 40%.
Cold runner: Tunnel gate design for automatic degating.
This configuration enables precise injection molding for Medical product of needle tubing with wall thickness as low as 0.3 mm. For syringe without needle applications, the tunnel gate leaves no visible mark on the luer taper surface.
Hypodermic Needle Tubing: Meeting Medical Grade Requirements
Hypodermic needle tubing demands exceptional straightness and burr-free tips. Using precise injection molding for Medical product, Thinkmold produces hypodermic needle tubing with:
Inner diameter range: 0.5 mm – 3.0 mm (customizable)
Concentricity ≤0.02 mm
Surface roughness Ra ≤0.4 μm
A recent validation run of 50,000 units showed 99.3% of hypodermic needle tubing passed a 20 psi air leakage test. The material’s chemical resistance (PP or PC) withstands ethylene oxide sterilization without stress cracking. For safety-engineered devices, hypodermic needle tubing integrates with needle shields and retraction mechanisms.
Syringe Without Needle: Compatibility and User Safety
Syringe without needle barrels and connectors must lock precisely with standard luer lock or slip tips. Precise injection molding for Medical product ensures:
Luer taper angle: 6% (exact to ISO 594)
No flash on the tip opening – verified by 10x magnification
Breakaway force between syringe without needle and accessory ≤2 N
Field data from 12 hospital trials indicate that syringe without needle molded from PC or PET reduces breakage incidents by 34% compared to conventional molding. The precise injection molding for Medical product process also eliminates sink marks on thick sections (up to 2.5 mm wall thickness). For vacuum-assisted drug delivery, syringe without needle produced with tunnel gate cold runners shows zero leakage at 500 mbar negative pressure.
Needle Tubing Hanging Buckle: An Overlooked Critical Accessory
Many infusion and drainage sets require a needle tubing hanging buckle to secure the line to IV poles or patient garments. This small component must resist creep deformation under 200g load for 72 hours. Using precise injection molding for Medical product, Thinkmold molds the needle tubing hanging buckle from ABS or PVC with:
Integrated snap-fit design (assembly force 5–8 N)
Reinforced rib structure to prevent cracking at -10°C
Compatibility with needle tubing outer diameters from 2.0 mm to 4.5 mm
Production records show that 100,000 units of needle tubing hanging buckle can be delivered monthly with 0.05mm flatness tolerance. The needle tubing hanging buckle is often requested as a separate add-on for syringe without needle kits and gravity infusion sets. By combining hypodermic needle tubing with a needle tubing hanging buckle, medical staff reduce line tangling incidents by an estimated 27% (based on internal ergonomic tests).
Supply Capacity and Lead Times
Thinkmold maintains a dedicated production line for precise injection molding for Medical product:
Supply capacity: 100,000 pcs/month of injection plastic needle tubing (all materials combined)
Delivery time: As customer requested – sample tooling in 15 days, production tooling in 25 days
Quality system: Each batch of hypodermic needle tubing includes a CMM report and material cert
The needle tubing product family includes straight cut, angled cut, and flanged end versions. For syringe without needle hubs, the precise injection molding for Medical product process achieves pull-out force >30 N per ISO 7886. Additionally, the needle tubing hanging buckle can be overmolded directly onto needle tubing for a permanent attachment – a feature validated by 500 pull cycles without detachment.
Regulatory and Environmental Compliance
All injection plastic needle tubing complies with REACH and RoHS. Materials (PP, PE, PC, PVC, ABS, PET) are USP Class VI rated for medical use. Precise injection molding for Medical product reduces waste through hot runner systems – scrap rate below 2.8% vs industry average 5.5%. For hypodermic needle tubing, the cold runner design recycles 100% of regrind (subject to customer approval).
Direct Answers to Procurement Decisions
When selecting a supplier for needle tubing, consider these validated metrics:
Tolerance: Thinkmold guarantees ±0.05mm on all hypodermic needle tubing and syringe without needle components.
Material compatibility: Six polymer options, each with chemical resistance data sheets.
Tooling life: Superplast 400 cores exceed 2 million shots for needle tubing moulds.
Buckle integration: The needle tubing hanging buckle can be molded as a separate part or attached via snap-fit.
For OEMs requiring precise injection molding for Medical product, Thinkmold provides DFM reports within 48 hours, including shrinkage simulation for each material. Hypodermic needle tubing samples are available from existing cavity configurations, and syringe without needle prototypes can be run using tunnel gate cold runners without additional hot runner investment.
Contact Thinkmold for Custom Needle Tubing Solutions
All needle tubing inquiries – including hypodermic needle tubing, syringe without needle, and needle tubing hanging buckle – are supported by engineering reviews. Request a precise injection molding for Medical product feasibility study with your 3D drawing and material preference.
Thinkmold Precision Industries Co., Ltd
Phone : +86-755-86514155
Fax : +86-755-86514156
Email : finance@thinkmold.net




